Home

About us

Research topics

Slide show & flyer

Facilities & equipment

Testing services

Movie gallery

Publications list

Job vacancies

Collaboration with industry

Composites for dummies

Composites weblinks

Curriculum Vitae

Contact details

How to reach us ?

Home > Publications

print

Publications by Prof. Wim Van Paepegem


A full bibliographical list can be found in the open access repository of the Ghent University Academic Bibliography, for author VAN PAEPEGEM Wim.

The list of publications can also be consulted from:

The publications below are listed in the following categories:


A1. Articles in international journals of the Science Citation Index (SCI)

[2001-1] Van Paepegem, W., Degrieck, J. and De Baets, P. (2001).
Finite Element Approach for Modelling Fatigue Damage in Fibre-reinforced Composite Materials.
Composites Part B, 32(7), 575-588.
SCI-IF: 2.143, SCI subject category Materials Science, Composites, rank: 5/24.
[2001-2] Van Paepegem, W. and Degrieck, J. (2001).
Fatigue Degradation Modelling of Plain Woven Glass/epoxy Composites.
Composites Part A, 32(10), 1433-1441.
SCI-IF: 2.744, SCI subject category Materials Science, Composites, rank: 2/24.
[2001-3] Van Paepegem, W. and Degrieck, J. (2001).
Experimental Setup for and Numerical Modelling of Bending Fatigue Experiments on Plain Woven Glass/epoxy Composites.
Composite Structures, 51(1), 1-8.
SCI-IF: 2.231, SCI subject category Materials Science, Composites, rank: 4/24.
[2001-4] Degrieck, J., Van Paepegem, W. and Boone, P. (2001).
Application of digital phase-shift shadow Moiré to micro deformation measurements of curved surfaces.
Optics and Lasers in Engineering, 36(1), 29-40.
SCI-IF: 1.916, SCI subject category Optics, rank: 25/80.
[2002-5] Van Paepegem, W. and Degrieck, J. (2002).
Effects of Load Sequence and Block Loading on the Fatigue Response of Fibre-reinforced Composites.
Mechanics of Advanced Materials and Structures, 9(1), 19-35.
SCI-IF: 0.701, SCI subject category Materials Science, Characterization & Testing, rank: 14/32.
[2002-6] Van Paepegem, W. and Degrieck, J. (2002).
Coupled Residual Stiffness and Strength Model for Fatigue of Fibre-reinforced Composite Materials.
Composites Science and Technology, 62(5), 687-696.
SCI-IF: 3.328, SCI subject category Materials Science, Composites, rank: 1/24.
[2002-7] Van Paepegem, W. and Degrieck, J. (2002).
Tensile and Compressive Damage Coupling for Fully-reversed Bending Fatigue of Fibre-reinforced Composites.
Fatigue and Fracture of Engineering Materials & Structures, 25(6), 547-562.
SCI-IF: 0.861, SCI subject category Engineering, Mechanical, rank: 58/125.
[2002-8] Van Paepegem, W. and Degrieck, J. (2002).
A New Coupled Approach of Residual Stiffness and Strength for Fatigue of Fibre-reinforced Composites.
International Journal of Fatigue, 24(7), 747-762.
SCI-IF: 1.976, SCI subject category Engineering, Mechanical, rank: 14/125.
[2003-9] Van Paepegem, W. and Degrieck, J. (2003).
Calculation of Damage-dependent Directional Failure Indices from the Tsai-Wu Static Failure Criterion.
Composites Science and Technology, 63(2), 305-310.
SCI-IF: 3.328, SCI subject category Materials Science, Composites, rank: 1/24.
[2003-10] Van Paepegem, W. and Degrieck, J. (2003).
Modelling damage and permanent strain in fibre-reinforced composites under in-plane fatigue loading.
Composites Science and Technology, 63(5), 677-694.
SCI-IF: 3.328, SCI subject category Materials Science, Composites, rank: 1/24.
[2004-11] Van Paepegem, W. and Degrieck, J. (2004).
Simulating in-plane fatigue damage in woven glass fibre-reinforced composites subject to fully-reversed cyclic loading.
Fatigue and Fracture of Engineering Materials & Structures, 27(12), 1197-1208.
SCI-IF: 0.861, SCI subject category Engineering, Mechanical, rank: 58/125.
[2005-12] Van Paepegem, W., Dechaene, R. and Degrieck, J. (2005).
Nonlinear correction to the bending stiffness of a damaged composite beam.
Composite Structures, 67(3), 359-364.
SCI-IF: 2.231, SCI subject category Materials Science, Composites, rank: 4/24.
[2005-13] Van Paepegem, W. and Degrieck, J. (2005).
Simulating Damage and Permanent Strain in Composites under In-plane Fatigue Loading.
Computers & Structures, 83(23-24), 1930-1942.
SCI-IF: 1.509, SCI subject category Engineering, Civil, rank: 22/122.
[2006-14] Quintelier, J., Samyn, P., De Baets, P., Tuzolana, T., Van Paepegem, W., Van den Abeele, F. and Vermeulen, J. (2006).
Wear behavior of carbon fiber-reinforced poly(phenylene sulfide).
Polymer Composites, 27(1), 92-98.
SCI-IF: 1.482, SCI subject category Materials Science, Composites, rank: 6/24.
[2006-15] Van Paepegem, W., De Geyter, K., Vanhooymissen, P. and Degrieck, J. (2006).
Effect of friction on the hysteresis loops from three-point bending fatigue tests of fibre-reinforced composites.
Composite Structures, 72(2), 212-217.
SCI-IF: 2.231, SCI subject category Materials Science, Composites, rank: 4/24.
[2006-16] Samyn, P., Van Schepdael, L., Van Paepegem, W., Leendertz, J.S., Suister, E., De Baets, P. and Degrieck, J. (2006).
Fracture assessment of carbon fibre/epoxy reinforcing rings through a combination of full-scale testing, small-scale testing and stress modelling.
Applied Composite Materials, 13(2), 57-85.
SCI-IF: 1.048, SCI subject category Materials Science, Composites, rank: 8/24.
[2006-17] Samyn, P., Van Schepdael, L., Leendertz, J.S., Gerber, A., Van Paepegem, W., De Baets, P. and Degrieck, J. (2006).
Deformation of reinforced polymer bearing elements on full-scale compressive strength and creep tests under yielding conditions.
Polymer Testing, 25(2), 230-245.
SCI-IF: 1.646, SCI subject category Materials Science, Characterization & Testing, rank: 3/32.
[2006-18] Samyn, P., Van Schepdael, L., Leendertz, J.S., Gerber, A., Van Paepegem, W., De Baets, P. and Degrieck, J. (2006).
Large scale friction and wear tests on a hybrid UHMWPE-pad / primer coating combination used as bearing element in an extremely high-loaded ball-joint.
Tribology International, 39(8), 796-811.
SCI-IF: 1.536, SCI subject category Engineering, Mechanical, rank: 28/125.
[2006-19] Van Paepegem, W., De Baere, I. and Degrieck, J. (2006).
Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites. Part I: Experimental results.
Composites Science and Technology, 66(10), 1455-1464.
SCI-IF: 3.328, SCI subject category Materials Science, Composites, rank: 1/24.
[2006-20] Van Paepegem, W., De Baere, I. and Degrieck, J. (2006).
Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites. Part II: Model development and finite element simulations.
Composites Science and Technology , 66(10), 1465-1478.
SCI-IF: 3.328, SCI subject category Materials Science, Composites, rank: 1/24.
[2006-21] Samyn, P., Van Paepegem, W., Leendertz, J.S., Gerber, A., Van Schepdael, L., Degrieck, J. and De Baets, P. (2006).
Large-scale evaluation of constrained bearing elements made of thermosetting polyester resin and polyester fabric reinforcement.
Journal of Tribology – Transactions of the ASME, 128(4), 681-696.
SCI-IF: 1.213, SCI subject category Engineering, Mechanical, rank: 39/125.
[2007-22] Samyn, P., Van Schepdael, L., Leendertz, J.S., Gerber, A., Van Paepegem, W., Degrieck, J. and De Baets, P. (2007).
Full-scale analysis of deformation and stress distribution for constrained composite bearing elements under compressive yielding conditions.
Materials & Design, 28(9), 2450-2470.
SCI-IF: 2.913, SCI subject category Materials Science, Multidisciplinary, rank: 41/241.
[2007-23] Luyckx, G., De Waele, W., Degrieck, J., Van Paepegem, W., Vlekken, J., Vandamme, S. and Chah, K. (2007).
Deformation Monitoring of Composite Structures: Three dimensional strain and temperature monitoring of composite laminates.
INSIGHT, 49(1), 10-16 Jan 2007.
SCI-IF: 0.450, SCI subject category Materials Science, Characterization & testing, rank: 22/32.
[2007-24] De Baere, I., Van Paepegem, W., Degrieck, J., Sol, H., Van Hemelrijck, D. and Petreli, A. (2007).
Comparison of different identification techniques for measurement of quasi-zero Poisson's ratio of fabric reinforced laminates.
Composites Part A, 38(9), 2047-2054.
SCI-IF: 2.744, SCI subject category Materials Science, Composites, rank: 2/24.
[2007-25] Van Paepegem, W., De Baere, I., Lamkanfi, E. and Degrieck, J. (2007).
Poisson’s ratio as a sensitive indicator of (fatigue) damage in fibre-reinforced plastics.
Fatigue and Fracture of Engineering Materials & Structures, 30(4), 269–276.
SCI-IF: 0.861, SCI subject category Engineering, Mechanical, rank: 58/125.
[2007-26] Samyn, P., Van Schepdael, L., Leendertz, J.S., Van Paepegem, W., De Baets, P. and Degrieck, J. (2007).
Short-beam-shear testing of carbon fibre/epoxy ring segments with variable cross-sectional geometry as a representative selection criterion for full-scale delamination.
ASTM Journal of Testing and Evaluation, 35(3), 310-320.
SCI-IF: 0.384, SCI subject category Materials Science, Characterization & testing, rank: 24/32.
[2007-27] Van Paepegem, W., Van Schepdael, L., Degrieck, J., Samyn, P., De Baets, P., Suister, E. and Leendertz, J.S. (2007).
Fast characterization of carbon/epoxy rings for use in the ball-joints of the Maeslant storm surge barrier.
Composite Structures, 78(3), 359-367.
SCI-IF: 2.231, SCI subject category Materials Science, Composites, rank: 4/24.
[2007-28] Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2007).
Finite element analysis of transmission of leaky Rayleigh waves at the extremity of a fluid-loaded thick plate.
Journal of Applied Physics, 101(11), Art. No. 114907.
SCI-IF: 2.210, SCI subject category Physics, Applied, rank: 32/128.
[2007-29] Van Paepegem, W., Degrieck, J., Samyn, P., De Baets, P., Van Schepdael, L., Suister, E. and Leendertz, J.S. (2007).
Characterization of composites for use in the ball-joints of the Maeslant storm surge barrier.
Polymer Composites, 28(4), 470-478.
SCI-IF: 1.482, SCI subject category Materials Science, Composites, rank: 6/24.
[2007-30] De Baere, I., Voet, E., Van Paepegem, W., Vlekken, J., Cnudde, V., Masschaele, B. and Degrieck, J. (2007).
Strain Monitoring in Thermoplastic Composites with Optical Fiber Sensors : embedding process, visualization with micro-tomography and fatigue results.
Journal of Thermoplastic Composite Materials, 20(5), 453-472.
SCI-IF: 0.750, SCI subject category Materials Science, Composites, rank: 12/24.
[2007-31] De Baere, I., Van Paepegem, W. and Degrieck, J. (2007).
The use of rivets for electrical resistance measurement on carbon fibre-reinforced thermoplastics.
Smart Materials and Structures, 16(5), 1821-1828.
SCI-IF: 2.024, SCI subject category Instruments & Instrumentation, rank: 7/57.
[2007-32] Samyn, P., Van Paepegem, W., Leendertz, J.S., Suister, E., Van Schepdael, L., Degrieck, J. and De Baets, P. (2007).
Global analysis and constructional aspects in the redesign of bearing elements for a movable storm surge barrier.
Engineering Structures, 29(10), 2673-2691.
SCI-IF: 1.713, SCI subject category Engineering, Civil, rank: 18/122.
[2008-33] De Baere, I., Van Paepegem, W. and Degrieck, J. (2008).
Design of a modified three-rail shear test for shear fatigue of composites.
Polymer Testing, 27(3), 346-359.
SCI-IF: 1.646, SCI subject category Materials Science, Characterization & Testing, rank: 3/32.
[2008-34] De Baere, I., Van Paepegem, W. and Degrieck, J. (2008).
Design of mechanical clamps with extra long wedge grips for static and fatigue testing of composite materials in tension and compression.
Experimental Techniques, 32(3), 62-69.
SCI-IF: 0.378, SCI subject category Materials Science, Characterization & testing, rank: 25/32.
[2008-35] De Baere, I., Van Paepegem, W. and Degrieck, J. (2008).
Comparison of the modified three-rail shear test and the [(+45/-45)]ns tensile test for pure shear fatigue loading of carbon fabric thermoplastics.
Fatigue and Fracture of Engineering Materials & Structures, 31(6), 414-427.
SCI-IF: 0.861, SCI subject category Engineering, Mechanical, rank: 58/125.
[2008-36] Van Paepegem, W., Shulev, A., Moentjens, A., Harizanova, J., Degrieck, J. and Sainov, V. (2008).
Use of projection moiré for measuring the instantaneous out-of-plane deflections of composite plates subject to bird strike.
Optics and Lasers in Engineering, 46(7), 527-534.
SCI-IF: 1.916, SCI subject category Optics, rank: 25/80.
[2008-37] Van Hemelrijck, D., Ramault, C., Makris, A., Lamkanfi, E., Van Paepegem, W. and Lecompte, D. (2008).
Biaxial testing of fibre reinforced composite laminates.
Proceedings of the Institution of Mechanical Engineers Part L – Journal of Materials – Design and applications, 222(L4), 231-239.
SCI-IF: 0.560, SCI subject category Materials Science, Multidisciplinary, rank: 191/241.
[2008-38] De Baere, I., Van Paepegem, W. and Degrieck, J. (2008).
On the feasibility of a three-point bending setup for the validation of (fatigue) damage models for thin composite laminates.
Polymer Composites, 29(10), 1067-1076.
SCI-IF: 1.482, SCI subject category Materials Science, Composites, rank: 6/24.
[2009-39] De Baere, I., Luyckx, G., Voet, E., Van Paepegem, W. and Degrieck, J. (2009).
On the feasibility of optical fibre sensors for strain monitoring in thermoplastic composites under fatigue loading conditions.
Special Issue of Optics and Lasers in Engineering, 47(3-4), 403-411.
SCI-IF: 1.916, SCI subject category Optics, rank: 25/80.
[2009-40] Van Paepegem, W., Shulev, A., Roussev, I., De Pauw, S., Degrieck, J. and Sainov, V. (2009).
Study of the deformation characteristics of window security film by digital image correlation techniques.
Special Issue of Optics and Lasers in Engineering, 47(3-4), 390-397.
SCI-IF: 1.916, SCI subject category Optics, rank: 25/80.
[2009-41] De Baere I., Van Paepegem W. and Degrieck J. (2009).
On the nonlinear evolution of the Poisson's ratio under quasi-static loading for a carbon fabric-reinforced thermoplastic. Part I: Influence of the sensor.
Polymer Testing, 28(2), 196-203.
SCI-IF: 1.646, SCI subject category Materials Science, Characterization & Testing, rank: 3/32.
[2009-42] De Baere I., Van Paepegem W. and Degrieck J. (2009).
On the nonlinear evolution of the Poisson's ratio under quasi-static loading for a carbon fabric-reinforced thermoplastic. Part II. Analytical explanation.
Polymer Testing, 28(3), 324-330.
SCI-IF: 1.646, SCI subject category Materials Science, Characterization & Testing, rank: 3/32.
[2009-43] De Baere, I., Van Paepegem, W. and Degrieck, J. (2009).
On the design of end tabs for quasi-static and fatigue testing of fibre-reinforced composites.
Polymer Composites, 30(4), 381-390.
SCI-IF: 1.482, SCI subject category Materials Science, Composites, rank: 6/24.
[2009-44] Blommaert, C., Van Paepegem, W. and Degrieck, J. (2009).
Design of Composite Material for Cost Effective Large Scale Production of Components for Floating Offshore Structures.
Special Issue of Plastics, Rubber and Composites: Macromolecular Engineering, 38(2-4), 146-152.
SCI-IF: 0.631, SCI subject category Materials Science, Composites, rank: 14/24.
[2009-45] Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2009).
Numerical study of Rayleigh wave transmission through an acoustic barrier.
Journal of Applied Physics, 105(11), article number 114902.
SCI-IF: 2.210, SCI subject category Physics, Applied, rank: 32/128.
[2009-46] De Baere, I., Van Paepegem, W. and Degrieck, J. (2009).
Comparison of different set-ups for fatigue testing of thin composite laminates in bending.
Special Issue of International Journal of Fatigue, 31(6), 1095-1011.
SCI-IF: 1.976, SCI subject category Engineering, Mechanical, rank: 14/125.
[2009-47] De Baere, I., Van Paepegem, W. and Degrieck, J. (2009).
Modelling the nonlinear shear stress-strain behaviour of a carbon fabric reinforced polyphenylene sulphide from rail shear and [(+45°,-45°)]4s tensile test.
Polymer Composites, 30(7), 1016-1026.
SCI-IF: 1.482, SCI subject category Materials Science, Composites, rank: 6/24.
[2009-48] De Backer G., Vantorre M., Beels C., De Pré J., Victor S., De Rouck J., Blommaert C. and Van Paepegem W. (2009).
Experimental Investigation of Water Impact on Axisymmetric Bodies.
Applied Ocean Research, 31(3), 143-156.
SCI-IF: 1.072, SCI subject category Engineering, Ocean, rank: 5/15.
[2009-49] Rah, K., Van Paepegem, W., Habraken, A.M., de Sousa, R.A. and Valente, R.A.F. (2009).
Evaluation of different advanced finite element concepts for detailed stress analysis of laminated composite structures.
International Journal of Material Forming, 2(1), 943-947.
SCI-IF: 0.509, SCI subject category Metallurgy & Metallurgical Engineering, rank: 37/76.
[2009-50] Luyckx, G., Voet, E., Geernaert, T., Chah, K., Nasilowski, T., De Waele, W., Van Paepegem, W., Becker, M., Bartelt, H., Urbanczyk, W., Wojcik, J., Degrieck, J., Berghmans, F. and Thienpont, H. (2009).
Response of FBGs in Micro-structured and Bow tie Fibers Embedded in Laminated Composite.
IEEE Photonics Technology Letters, 21(18), 1290-1292.
SCI-IF: 2.038, SCI subject category Engineering, Electrical & Electronic, rank: 46/243.
[2010-51] De Baere, I., Van Paepegem, W. and Degrieck, J. (2010).
Electrical resistance measurement for in-situ monitoring of fatigue of carbon fabric composites.
Special issue of International Journal of Fatigue, 32(1), 197-207.
SCI-IF: 1.976, SCI subject category Engineering, Mechanical, rank: 14/125.
[2010-52] Van Paepegem, W., De Baere, I., Lamkanfi, E. and Degrieck, J. (2010).
Monitoring quasi-static and cyclic fatigue damage in fibre-reinforced plastics by Poisson's ratio evolution.
Special issue of International Journal of Fatigue, 32(1), 184-196.
SCI-IF: 1.976, SCI subject category Engineering, Mechanical, rank: 14/125.
[2010-53] Degroote, J., Souto-Iglesias, A., Van Paepegem, W., Annerel, S., Bruggeman, P. and Vierendeels, J. (2010).
Partitioned simulation of the interaction between an elastic structure and free surface flow.
Computer Methods in Applied Mechanics and Engineering, 199(33-36), 2085-2098.
SCI-IF: 2.617, SCI subject category Engineering, Multidisciplinary, rank: 4/90.
[2010-54] Rezaei, A., Ost, W., Van Paepegem, W., Degrieck, J. and De Baets, P. (2010).
Experimental Study and Numerical Simulation of the Large-Scale Testing of Polymeric Composite Journal Bearings: Two-Dimensional Modeling and Validation.
Tribology Letters, 37(2), 261-272.
SCI-IF: 1.743, SCI subject category Engineering, Mechanical, rank: 19/125.
[2010-55] Lamkanfi, E., Van Paepegem, W., Degrieck, J., Makris, A., Ramault, C. and Van Hemelrijck, D. (2010).
Strain distribution in cruciform specimens subjected to biaxial loading conditions. Part 1: Two-dimensional versus three-dimensional finite element model.
Polymer Testing, 29(1), 7-13.
SCI-IF: 1.646, SCI subject category Materials Science, Characterization & Testing, rank: 3/32.
[2010-56] Lamkanfi, E., Van Paepegem, W., Degrieck, J., Makris, A., Ramault, C. and Van Hemelrijck, D. (2010).
Strain distribution in cruciform specimens subjected to biaxial loading conditions. Part 2: Influence of geometrical discontinuities.
Polymer Testing, 29(1), 132-138.
SCI-IF: 1.646, SCI subject category Materials Science, Characterization & Testing, rank: 3/32.
[2010-57] Palanivelu, S., Van Paepegem, W., Degrieck, J., Van Ackeren, J., Kakogiannis, D., Van Hemelrijck, D., Wastiels, J. and Vantomme, J. (2010).
Experimental study on the axial crushing behaviour of pultruded composite tubes.
Polymer Testing, 29(2), 224-234.
SCI-IF: 1.646, SCI subject category Materials Science, Characterization & Testing, rank: 3/32.
[2010-58] Makris, A., Ramault, C., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2010).
Shape optimisation of a biaxially loaded cruciform specimen.
Polymer Testing, 29(2), 216-223.
SCI-IF: 1.646, SCI subject category Materials Science, Characterization & Testing, rank: 3/32.
[2010-59] Palanivelu, S., Van Paepegem, W., Degrieck, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D., Wastiels, J. and Vantomme, J. (2010).
Comparative study of the quasi-static energy absorption of small-scale composite tubes with different geometrical shapes for use in sacrificial cladding structures.
Polymer Testing, 29(3), 381-396.
SCI-IF: 1.646, SCI subject category Materials Science, Characterization & Testing, rank: 3/32.
[2010-60] Cofaru, C., Philips, W. and Van Paepegem, W. (2010).
Evaluation of digital image correlation techniques using realistic ground truth speckle images.
Measurement Science and Technology, 21(5), article 055102.
SCI-IF: 1.435, SCI subject category Engineering, Multidisciplinary, rank: 21/90.
[2010-61] Kakogiannis, D., Van Hemelrijck, D., Wastiels, J., Palanivelu, S., Van Paepegem, W., Vantomme, J., Kotzakolios, A. and Kostopoulos, V. (2010).
Assessment of Pressure Waves Generated by Explosive Loading.
CMES-Computer modeling in Engineering & Sciences, 65(1), 75-93.
SCI-IF: 4.785, SCI subject category Engineering, Multidisciplinary, rank: 2/67.
[2010-62] Palanivelu, S., Van Paepegem, W., Degrieck, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D., Wastiels, J. and Vantomme, J. (2010).
Parametric study of crushing parameters and failure patterns of pultruded composite tubes using cohesive elements and seam. Part I –Central delamination and triggering modelling.
Polymer Testing, 29(6), 729-741.
SCI-IF: 1.646, SCI subject category Materials Science, Characterization & Testing, rank: 3/32.
[2010-63] Palanivelu, S., Van Paepegem, W., Degrieck, J., Van Ackeren, J., Kakogiannis, D., Wastiels, J., Van Hemelrijck, D., and Vantomme, J. (2010).
Parametric study of crushing parameters and failure patterns of pultruded composite tubes using cohesive elements and seam. Part II – Multiple delaminations and initial geometric imperfections.
Polymer Testing, 29(7), 803-814.
SCI-IF: 1.646, SCI subject category Materials Science, Characterization & Testing, rank: 3/32.
[2010-64] Makris, A., Ramault, C., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2010).
An investigation of the mechanical behaviour of carbon epoxy cross ply cruciform specimens under biaxial loading.
Polymer Composites, 31(9), 1554-1561.
SCI-IF: 1.482, SCI subject category Materials Science, Composites, rank: 6/24.
[2010-65] Palanivelu, S., Van Paepegem, W., Degrieck, J., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2010).
Comparison of the crushing performance of hollow and foam-filled small-scale composite tubes with different geometrical shapes for use in sacrificial cladding structures.
Composites Part B: Engineering, 41(6), 434-445.
SCI-IF: 2.143, SCI subject category Materials Science, Composites, rank: 5/24.
[2010-66] De Strycker, M., Schueremans, L., Van Paepegem, W. and Debruyne, D. (2010).
Measuring the thermal expansion coefficient of tubular steel specimens with digital image correlation techniques.
Optics and Lasers in Engineering, 48(10), 978-986.
SCI-IF: 1.916, SCI subject category Optics, rank: 25/80.
[2010-67] Daggumati, S., Van Paepegem, W., Degrieck, J., Xu, J., Lomov, S.V. and Verpoest, I. (2010).
Local damage in 5-harness satin weave composite under static tension: part I – experimental analysis.
Composites Science and Technology, 70(13), 1926-1933.
SCI-IF: 3.328, SCI subject category Materials Science, Composites, rank: 1/24.
[2010-68] Daggumati, S., Van Paepegem, W., Degrieck, J., Xu, J., Lomov, S.V. and Verpoest, I. (2010).
Local damage in 5-harness satin weave composite under static tension: part II – Meso-FE modelling.
Composites Science and Technology, 70(13), 1934-1941.
SCI-IF: 3.328, SCI subject category Materials Science, Composites, rank: 1/24.
[2010-69] Cofaru, C., Philips, W. and Van Paepegem, W. (2010).
Improved Newton-Raphson digital image correlation method for full-field displacement and strain calculation.
Applied Optics, 49(33), 6472-6484.
SCI-IF: 1.689, SCI subject category Optics, rank: 29/80.
[2011-70] Rezaei, A., Verhelst, R., Van Paepegem, W. and Degrieck, J. (2011).
Finite element modeling and experimental study of oblique soccer ball bounce.
Journal of Sports Sciences, 29(11), 1201-1213.
SCI-IF: 2.246, Q1 quartile, SCI subject category Sports Sciences, rank: 19/81.
[2011-71] Palanivelu, S., Van Paepegem, W., Degrieck, J., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2011).
Crushing and energy absorption performance of different geometrical shapes of small-scale glass/polyester composite tubes under quasi-static loading conditions.
Composite Structures, 93(2), 992-1007.
SCI-IF: 3.318, Q1 quartile, SCI subject category Materials Science, Composites, rank: 3/24.
[2011-72] Rah, K., Van Paepegem, W., Habraken, A.M. and Degrieck, J. (2011).
A partial hybrid stress solid-shell element for the analysis of laminated composites.
Computer Methods in Applied Mechanics and Engineering, 200(49-52), 3526-3539.
SCI-IF: 2.959, Q1 quartile, SCI subject category Mathematics, Interdisciplinary applications, rank: 4/99.
[2011-73] Rezaei, A., Ost, W., Van Paepegem, W., De Baets, P. and Degrieck, J. (2011).
Experimental study and numerical simulation of the large scale testing of polymeric composite journal bearings: Threedimensional and dynamic modeling.
Wear, 270(7-8), 431-438.
SCI-IF: 1.913, Q1 quartile, SCI subject category Engineering, Mechanical, rank: 23/130.
[2011-74] Van Paepegem, W., Blommaert, C., De Baere, I., Degrieck, J., De Backer, G., De Rouck, J., Degroote, J., Vierendeels, J., Matthys, S. and Taerwe, L. (2011).
Slamming wave impact of a composite buoy for wave energy applications: design and large scale testing.
Polymer Composites, 32(5), 700-713.
SCI-IF: 1.632, Q2 quartile, SCI subject category Materials Science, Composites, rank: 7/24.
[2011-75] Peirs, J., Verleysen, P., Van Paepegem, W. and Degrieck, J. (2011).
Determining the stress-strain behaviour at large strains from high strain rate tensile and shear experiments.
International Journal of Impact Engineering, 38(5), 406-415.
SCI-IF: 2.201, Q1 quartile, SCI subject category Engineering, Mechanical, rank: 17/130.
[2011-76] Daggumati, S., Voet, E., Van Paepegem, W., Degrieck, J., Xu, J., Lomov, S.V. and Verpoest, I. (2011).
Local strain in 5-harness satin weave composite under static tension: part I – experimental analysis.
Composites Science and Technology, 71(8), 1171-1179.
SCI-IF: 3.328, SCI subject category Materials Science, Composites, rank: 1/24.
[2011-77] Daggumati, S., Van Paepegem, W., Degrieck, J., Praet, T., Verhegghe, B., Xu, J., Ivanov, D.S., Lomov, S.V. and Verpoest, I. (2011).
Local strain in 5-harness satin weave composite under static tension: part II – Meso-FE analysis.
Composites Science and Technology, 71(9), 1217-1224.
SCI-IF: 3.569, Q1 quartile, SCI subject category Materials Science, Composites, rank: 1/24.
[2011-78] De Strycker, M., Lava, P., Van Paepegem, W., Schueremans, L. and Debruyne, D. (2011).
Measuring welding deformations with the Digital Image Correlation technique.
Welding Journal, 90(6), 107S-112S.
SCI-IF: 1.378, Q2 quartile, SCI subject category Metallurgy & Metallurgical Engineering, rank: 19/74.
[2011-79] Palanivelu, S., Van Paepegem, W., Degrieck, J., Reymen, B., Ndambi, J.-M.., Vantomme, J., Kakogiannis, D., Wastiels, J. and Van Hemelrijck, D. (2011).
Close-range blast loading on empty recyclable metal beverage cans for use in sacrificial cladding structure.
Engineering Structures, 33(6), 1966-1987.
SCI-IF: 1.838, Q1 quartile, SCI subject category Engineering, Civil, rank: 21/125.
[2011-80] Palanivelu, S., Van Paepegem, W., Degrieck, J., De Pauw, S., Vantomme, J., Wastiels, J., Kakogiannis, D. and Van Hemelrijck, D. (2011).
Low velocity axial impact crushing performance of empty recyclable metal beverage cans.
International Journal of Impact Engineering, 38(7), 622-636.
SCI-IF: 2.201, Q1 quartile, SCI subject category Engineering, Mechanical, rank: 17/130.
[2011-81] De Baere, I., Van Paepegem, W., Quaresimin, M. and Degrieck, J. (2011).
On the tension-tension fatigue behaviour of a carbon reinforced thermoplastic part I: limitations of the ASTM D3039/D3479 standard.
Polymer Testing, 30(6), 625-632.
SCI-IF: 2.240, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 2/33.
[2011-82] De Baere, I., Van Paepegem, W., Hochard, C. and Degrieck, J. (2011).
On the tension–tension fatigue behaviour of a carbon reinforced thermoplastic part II: Evaluation of a dumbbell-shaped specimen.
Polymer Testing, 30(6), 663-672.
SCI-IF: 2.240, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 2/33.
[2011-83] Ramault, C., Makris, A., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2011).
Comparison of Different Techniques for Strain Monitoring of a Biaxially Loaded Cruciform Specimen.
Strain, 47(2), 210-217.
SCI-IF: 1.283, Q2 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 10/33.
[2012-84] Cofaru, C., Philips, W. and Van Paepegem, W. (2012).
A novel speckle pattern - adaptive Digital Image Correlation approach with robust strain calculation.
Optics and Lasers in Engineering, 50(2), 187-198.
SCI-IF: 2.237, Q1 quartile, SCI subject category Optics, rank: 21/87.
[2012-85] Rah, K., Van Paepegem, W., Habraken, A.M. and Degrieck, J. (2012).
A mixed solid-shell element for the analysis of laminated composites.
International Journal for Numerical Methods in Engineering, 89(7), 805-828.
SCI-IF: 2.055, Q1 quartile, SCI subject category Engineering, Multidisciplinary, rank: 14/85.
[2012-86] De Baere, I., Van Paepegem, W. and Degrieck, J. (2012).
Feasibility study of fusion bonding for carbon fabric reinforced polyphenylene sulphide by hot-tool welding.
Journal of Thermoplastic Composite Materials, 25(2), 135-151.
SCI-IF: 1.250, Q2 quartile, SCI subject category Materials Science, Composites, rank: 9/24.
[2012-87] De Baere, I., Jacques, S., Van Paepegem, W. and Degrieck, J. (2012).
Study of the Mode I and Mode II interlaminar behaviour of a carbon fabric reinforced thermoplastic.
Polymer Testing, 31(2), 322-332.
SCI-IF: 2.240, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 2/33.
[2012-88] Rezaei, A., Ost, W., Van Paepegem, W., De Baets, P. and Degrieck, J. (2012).
A study on the effect of the clearance on the contact stresses and kinematics of polymeric composite journal bearings under reciprocating sliding conditions.
Tribology International, 48, 8-14.
SCI-IF: 1.936, Q1 quartile, SCI subject category Engineering, Mechanical, rank: 22/130.
[2012-89] Lyubenova, T., Stoykova, E., Ivanov, B., Van Paepegem, W., Degrieck, J. and Sainov, V. (2012).
Full-field stress analysis by holographic phase-stepping implementation of the photoelastic-coating method.
Physica Scripta, T149, article 014022.
SCI-IF: 1.126, Q3 quartile, SCI subject category Physics, Multidisciplinary, rank: 43/78.
[2012-90] Sukumaran, J., Ando, M., De Baets, P., Rodriguez Fereira, V., Szabadi, L., Kalacska, G. and Van Paepegem, W. (2012).
Modelling gear contact with twin-disc setup.
Tribology International, 49, 1-7.
SCI-IF: 1.936, Q1 quartile, SCI subject category Engineering, Mechanical, rank: 22/130.
[2012-91] De Baere, I., Allaer, K., Jacques, S., Van Paepegem, W. and Degrieck, J. (2012).
Interlaminar behaviour of infrared welded joints of carbon fabric reinforced polyphenylene sulphide.
Polymer Composites, 33(7), 1105-1113.
SCI-IF: 1.632, Q2 quartile, SCI subject category Materials Science, Composites, rank: 7/24.
[2012-92] Rezaei, A., Van Paepegem, W., De Baets, P. and Degrieck, J. (2012).
Adaptive finite element simulation of wear evolution in radial sliding bearings.
Wear, 296(1-2), 660-671.
SCI-IF: 1.913, Q1 quartile, SCI subject category Engineering, Mechanical, rank: 23/130.
[2012-93] Cofaru, C., Philips, W. and Van Paepegem, W. (2012).
A three-frame digital image correlation (DIC) method for the measurement of small displacements and strains.
Measurement Science and Technology, 23(10), article 105406.
SCI-IF: 1.433, Q2 quartile, SCI subject category Engineering, Multidisciplinary, rank: 23/85.
[2012-94] Rezaei, A., Rombouts, P., Van Paepegem, W., De Baets, P., Degrieck, J. and Weyten, L. (2012).
Condition monitoring of laminated composite sliding bearings using embedded capacitors.
Smart Materials and Structures, 21(10), Article 105022.
SCI-IF: 2.502, Q1 quartile, SCI subject category Instruments & Instrumentation, rank: 8/56.
[2013-95] Nobre, J.P., Stiffel, J.-H., Nau, A., Outeiro, J.C., Batista, A.C., Van Paepegem, W. and Scholtes, B. (2013).
Induced drilling strains in glass fibre reinforced epoxy composites.
CIRP Annals - Manufacturing Technology, 62(1), 87-90.
SCI-IF: 2.542, Q1 quartile, SCI subject category Engineering, Industrial, rank: 2/43.
[2013-96] Rah, K., Van Paepegem, W. and Degrieck, J. (2013).
An optimal versatile partial hybrid stress solid-shell element for the analysis of multilayer composites.
International Journal for Numerical Methods in Engineering, 93(2), 201-223.
SCI-IF: 2.055, Q1 quartile, SCI subject category Engineering, Multidisciplinary, rank: 14/85.
[2013-97] Daggumati, S., De Baere, I., Van Paepegem, W., Degrieck, J., Xu, J., Lomov, S.V. and Verpoest, I. (2013).
Fatigue and post-fatigue stress-strain analysis of a 5-harness satin weave carbon fibre-reinforced composite.
Composites Science and Technology, 74, 20-27.
SCI-IF: 3.569, Q1 quartile, SCI subject category Materials Science, Composites, rank: 1/24.
[2013-98] Van Nuffel, D., Vepa, K.S., De Baere, I., Degrieck, J., De Rouck, J. and Van Paepegem, W. (2013).
Study on the parameters influencing the accuracy and reproducibility of dynamic pressure measurements at the surface of a rigid body during water impact.
Experimental Mechanics, 53(2), 131-144.
SCI-IF: 1.548, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 6/33.
[2013-99] Rah, K., Van Paepegem, W., Habraken, A.M., Degrieck, J., Alves de Sousa, R.J. and Valente, R.A.F. (2013).
Optimal low-order fully integrated solid-shell elements.
Computational Mechanics, 51(3), 309-326.
SCI-IF: 2.525, Q1 quartile, SCI subject category Mathematics, Interdisciplinary applications, rank: 8/99.
[2013-100] Nila, A., Vanlanduit, S., Vepa, S. and Van Paepegem, W. (2013).
A PIV-Based Method for Estimating Slamming Loads During Water Entry of Rigid Bodies.
Measurement Science and Technology, 24(4), article number 045303.
SCI-IF: 1.433, Q2 quartile, SCI subject category Engineering, Multidisciplinary, rank: 23/85.
[2013-101] Lava, P., Van Paepegem, W., Coppieters, S., De Baere, I., Wang, Y. and Debruyne, D. (2013).
Impact of lens distortions on strain measurements obtained with 2D digital image correlation.
Optics and Lasers in Engineering, 51(5), 576-584.
SCI-IF: 2.237, Q1 quartile, SCI subject category Optics, rank: 21/87.
[2013-102] Rah, K., Van Paepegem, W. and Degrieck, J. (2013).
A novel versatile multilayer hybrid stress solid-shell element.
Computational Mechanics, 51(6), 825-841.
SCI-IF: 2.525, Q1 quartile, SCI subject category Mathematics, Interdisciplinary applications, rank: 8/99.
[2013-103] Vanwalleghem, J., De Baere, I., Loccufier, M. and Van Paepegem, W. (2013).
Sensor design for outdoor racing bicycle field testing for human vibration comfort evaluation.
Measurement Science and Technology, 24(9), Article number 095002.
SCI-IF: 1.433, Q2 quartile, SCI subject category Engineering, Multidisciplinary, rank: 23/85.
[2013-104] De Baere, I., Van Paepegem, W. and Degrieck, J. (2013).
Assessment of the interlaminar behaviour of a carbon fabric reinforced thermoplastic lapshear specimen under quasi-static and tension-tension fatigue loading.
Polymer Testing, 32(7), 1273-1282.
SCI-IF: 2.240, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 2/33.
[2013-105] Jain, A., Lomov, S.V., Abdin, Y., Verpoest, I. and Van Paepegem, W. (2013).
Pseudo-grain discretization and full Mori Tanaka formulation for random heterogeneous media: Predictive abilities for stresses in individual inclusions and the matrix.
Composites Science and Technology, 87, 86-93.
SCI-IF: 3.569, Q1 quartile, SCI subject category Materials Science, Composites, rank: 1/24.
[2013-106] Kakogiannis, D., Chung Kim Yuen, S., Palanivelu, S., Van Hemelrijck, D., Van Paepegem, W., Wastiels, J., Vantomme, J. and Nurick, G.N. (2013).
Response of pultruded composite tubes subjected to dynamic and impulsive axial loading.
Composites Part B: Engineering, 55, 537-547.
SCI-IF: 2.983, Q1 quartile, SCI subject category Engineering, Multidisciplinary, rank: 5/85.
[2013-107] De Schoenmaker, B., Van der Heijden, S., De Baere, I., Van Paepegem, W. and De Clerck, K. (2014).
Effect of electrospun polyamide 6 nanofibres on the mechanical properties of a glass fibre/epoxy composite.
Polymer Testing, 32(8), 1495-1501.
SCI-IF: 2.240, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 2/33.
[2013-108] Cofaru, C., Philips, W. and Van Paepegem, W. (2013).
Pixel-level robust Digital Image Correlation.
Optics Express, 21(24), 29979-29999.
SCI-IF: 3.488, Q1 quartile, SCI subject category Optics, rank: 10/87.
[2014-109] Zastavnik, F., Sol, H., Pyl, L., Kersemans, M. and Van Paepegem, W. (2014).
Comparison of shearography to scanning laser vibrometry as methods for local stiffness identification of beams.
Strain, 50(1), 82-94.
SCI-IF: 1.283, Q2 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 10/33.
[2014-110] Van Nuffel, D., Vepa, K.S., De Baere, I., Lava, P., Kersemans, M., Degrieck, J., De Rouck, J. and Van Paepegem, W. (2014).
A comparison between the experimental and theoretical impact pressures acting on a horizontal quasi-rigid cylinder during vertical water entry.
Ocean Engineering, 77, 42-54.
SCI-IF: 1.351, Q1 quartile, SCI subject category Engineering, Marine, rank: 1/14.
[2014-111] Jacques, S., De Baere, I. and Van Paepegem, W. (2014).
Application of periodic boundary conditions on multiple part finite element meshes for the meso-scale homogenization of textile fabric composites.
Composites Science and Technology, 92, 41-54.
SCI-IF: 3.569, Q1 quartile, SCI subject category Materials Science, Composites, rank: 1/24.
[2014-112] Vanwalleghem, J., De Baere, I., Loccufier, M. and Van Paepegem, W. (2014).
External damping losses in measuring the vibration damping properties in lightly damped specimens using transient time-domain methods.
Journal of Sound and Vibration, 333(6), 1596-1611.
SCI-IF: 1.813, Q1 quartile, SCI subject category Engineering, Mechanical, Applied, rank: 25/130.
[2014-113] Kersemans, M., De Baere, I., Degrieck, J., Van Den Abeele, K., Pyl, L., Zastavnik, F., Sol, H. and Van Paepegem, W. (2014).
Nondestructive Damage Assessment in Fiber Reinforced Composites with the Pulsed Ultrasonic Polar Scan.
Polymer Testing, 34, 85-96.
SCI-IF: 2.240, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 2/33.
[2014-114] Kersemans, M., Martens, A., Lammens, N., Van Den Abeele, K., Degrieck, J., Zastavnik, F., Pyl, L., Sol, H. and Van Paepegem, W. (2014).
Identification of the elastic properties of isotropic and orthotropic thin-plate materials with the pulsed ultrasonic polar scan.
Experimental Mechanics, 54(6), 1121-1132.
SCI-IF: 1.548, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 6/33.
[2014-115] Kersemans, M., Van Paepegem, W., Lemmens, B., Van Den Abeele, K., Pyl, L., Zastavnik, F., Sol, H. and Degrieck, J. (2014).
The Pulsed Ultrasonic Backscatter Polar Scan and its Applications for NDT and Material Characterization.
Experimental Mechanics, 54(6), 1059-1071.
SCI-IF: 1.548, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 6/33.
[2014-116] Allaeys, F., Luyckx, G., Sarrazin, C., Van Paepegem, W., Jovanov, L. and Philips, W. (2014).
3D shape measurement technique using a printed line pattern.
Experimental Mechanics, 54(6), 999-1099.
SCI-IF: 1.548, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 6/33.
[2014-117] Lammens, N., Kersemans, M., Luyckx, G., Van Paepegem, W. and Degrieck, J. (2014).
Improved accuracy in the determination of flexural rigidity of textile fabrics by the Peirce cantilever test (ASTM D1388).
Textile Research Journal, 84(12), 1307-1314.
SCI-IF: 1.599, Q1 quartile, SCI subject category Materials Science, Textiles, rank: 3/22.
[2014-118] Dinh, T.D., Rezaei, A. De Laet, L., Mollaert, M., Van Hemelrijck, D. and Van Paepegem, W. (2014).
A new elasto-plastic material model for coated fabric.
Engineering Structures, 71, 222-233.
SCI-IF: 1.838, Q1 quartile, SCI subject category Engineering, Civil, rank: 21/125.
[2014-119] Lamkanfi, E., Declercq, N., Van Paepegem, W. and Degrieck, J. (2014).
Scholte-Stoneley waves on an immersed solid dihedral: generation, propagation and scattering effects.
Ultrasonics, 54(6), 1685-1691.
SCI-IF: 1.942, Q1 quartile, SCI subject category Acoustics, rank: 6/31.
[2014-120] Kersemans, M., Van Paepegem, W., Van Den Abeele, K., Pyl, L., Zastavnik, F., Sol, H. and Degrieck, J. (2014).
Pitfalls in the Experimental Recording of Ultrasonic (Backscatter) Polar Scans for Composite Material Characterization.
Ultrasonics, 54(6), 1509-1521.
SCI-IF: 1.942, Q1 quartile, SCI subject category Acoustics, rank: 6/31.
[2014-121] Zastavnik, F., Pyl, L., Sol, H., Kersemans, M. and Van Paepegem, W. (2014).
Errors in shearography measurements due to the creep of the PZT shearing actuator.
Measurement Science and Technology, 25(8), Article number 085007.
SCI-IF: 1.433, Q2 quartile, SCI subject category Engineering, Multidisciplinary, rank: 23/85.
[2014-122] Allaer, K., De Baere, I., Van Paepegem, W. and Degrieck, J. (2014).
On the In-Plane Mechanical Properties of Stainless Steel Fibre Reinforced Ductile Composites.
Composites Science and Technology, 100, 34-43.
SCI-IF: 3.569, Q1 quartile, SCI subject category Materials Science, Composites, rank: 1/24.
[2014-123] Kersemans, M., Van Paepegem, W., Van Den Abeele, K., Wielant, J., Pyl, L., Zastavnik, F., Sol, H. and Degrieck, J. (2014).
Ultrasonic Characterizaion of Subsurface 2D Corrugation.
Journal of Nondestructive Evaluation, 33(3), 438-442.
SCI-IF: 1.462, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 8/33.
[2014-124] Kersemans, M., De Baere, I., Degrieck, J., Van Den Abeele, K., Pyl, L., Zastavnik, F., Sol, H. and Van Paepegem, W. (2014).
Damage Signature of Fatigued Fiber Reinforced Composites in the Pulsed Ultrasonic Polar Scan.
Experimental Mechanics, 54(8), 1467-1477.
SCI-IF: 1.548, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 6/33.
[2013-125] Van Paepegem, W., Palanivelu, S., Degrieck, J., Vantomme, J., Reymen, B., Kakogiannis, D., Van Hemelrijck, D. and Wastiels, J. (2014).
Blast performance of a sacrificial cladding with composite tubes for protection of civil engineering structures.
Composites Part B: Engineering, 65, 131-146.
SCI-IF: 2.983, Q1 quartile, SCI subject category Engineering, Multidisciplinary, rank: 5/85.
[2014-126] Xu, J., Lomov, S.V., Verpoest, I., Daggumati, S., Van Paepegem, W., Degrieck, J. and Olave, M. (2013).
A Progressive Damage Model of Textile Composites on Meso-Scale using Finite Element Method: Static Damage Analysis.
Journal of Composite Materials, 48(25), 3091-3109.
SCI-IF: 1.173, Q2 quartile, SCI subject category Materials Science, Composites, rank: 11/24.
[2014-127] Van Dam, S., De Pauw, S., Pelfrene, J. and Van Paepegem, W. (2014).
Experimental study on the dynamic behaviour of glass fitted with safety window film with a small-scale drop weight set-up.
International Journal of Impact Engineering, 73, 101-111.
SCI-IF: 2.201, Q1 quartile, SCI subject category Engineering, Mechanical, rank: 17/130.
[2014-128] Kersemans, M., Lammens, N., Degrieck, J., Van Den Abeele, K., Pyl, L., Zastavnik, F., Sol, H. and Van Paepegem, W. (2014).
Extraction of bulk wave characteristics from a pulsed ultrasonic polar scan.
Wave Motion, 51(7), 1071-1081.
SCI-IF: 1.513, Q2 quartile, SCI subject category Acoustics, rank: 9/31.
[2014-129] Kersemans, M., Allaer, K., Van Paepegem, W., Van Den Abeele, K., Pyl, L., Zastavnik, F., Sol, H. and Degrieck, J. (2014).
A novel ultrasonic strain gauge for single-sided measurement of a local 3D strain field.
Experimental mechanics, 54(9), 1673-1685.
SCI-IF: 1.548, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 6/33.
[2014-130] Van der Heijden, S., Daelemans, L., De Schoenmaker, B., De Baere, I., Rahier, H., Van Paepegem, W. and De Clerck, K. (2014).
Interlaminar toughening of resin transfer moulded glass fibre epoxy laminates by polycaprolactone electrospun nanofibres.
Composites Science and Technology, 104, 66-73.
SCI-IF: 3.569, Q1 quartile, SCI subject category Materials Science, Composites, rank: 1/24.
[2014-131] Kersemans, M., Martens, A., Van Den Abeele, K., Degrieck, J., Zastavnik, F., Pyl, L., Sol, H. and Van Paepegem, W. (2014).
Detection and localization of multiple delaminations in thin carbon fiber reinforced composites with the ultrasonic polar scan.
Journal of Nondestructive Evaluation, 33(4), 522-534.
SCI-IF: 1.462, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 8/33.
[2015-132] Lamkanfi, E., Van Paepegem, W. and Degrieck, J. (2015).
Shape optimization of a cruciform geometry for biaxial testing of polymers.
Polymer Testing, 41, 7-16.
SCI-IF: 2.240, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 2/33.
[2015-133] Gilabert, F.A., Garoz, D. and Van Paepegem, W. (2015).
Stress concentrations and bonding strength in encapsulation-based self-healing materials.
Materials and Design, 67, 28-41.
SCI-IF: 3.501, Q1 quartile, SCI subject category Materials Science, Multidisciplinary, rank: 43/260.
[2015-134] Sevenois, R. and Van Paepegem, W. (2015).
Fatigue Damage Modeling Techniques for Textile Composites: Review and Comparison With Unidirectional Composite Modeling Techniques.
Applied Mechanics Reviews, 67(2) article 021401.
SCI-IF: 2.647, Q1 quartile, SCI subject category Mechanics, rank: 11/137.
[2015-135] Kersemans, M., Martens, A., Van Den Abeele, K., Degrieck, J., Pyl, L., Zastavnik, F., Sol, H. and Van Paepegem, W. (2014).
The quasi-harmonic ultrasonic polar scan for material characterization: experiment and numerical modeling.
Ultrasonics, 58, 111-122.
SCI-IF: 1.942, Q1 quartile, SCI subject category Acoustics, rank: 6/31.
[2015-136] Allaer, K., De Baere, I., Van Paepegem, W. and Degrieck, J. (2015).
Direct fracture toughness determination of a ductile epoxy polymer from digital image correlation measurements on a single edge notched bending sample.
Polymer Testing, 42, 199-207.
SCI-IF: 2.240, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 2/33.
[2015-137] Zastavnik, F., Pyl, L., Jun, G., Sol, H., Kersemans, M. and Van Paepegem, W. (2015).
Calibration and correction procedure for quantitative out-of-plane shearography.
Measurement Science and Technology, 26(4), Article number 045201.
SCI-IF: 1.433, Q2 quartile, SCI subject category Engineering, Multidisciplinary, rank: 23/85.
[2015-138] Wagner, P., Bruder, T., Van Paepegem, W. and May, M. (2015).
An energy-based method for numerical fatigue analysis of multidirectional carbon fibre reinforced plastics.
Plastics, Rubbers and Composites, 44(3).
SCI-IF: 0.583, Q3 quartile, SCI subject category Materials Science, Composites, rank: 17/24.
[2015-139] Xu, J., Lomov, S.V., Verpoest, I., Daggumati, S., Van Paepegem, W. and Degrieck, J. (2015).
A Progressive Damage Model of Textile Composites on Meso-Scale using Finite Element Method: Fatigue Damage Analysis.
Computers and Structures, 152, 96-112.
SCI-IF: 2.134, Q1 quartile, SCI subject category Engineering, Civil, rank: 18/125.
[2015-140] Chiesura, G., Luyckx, G., Voet, E., Lammens, N., Van Paepegem, W., Degrieck, J., Dierick, M., Van Hoorebeke, L., Vanderniepen, P., Sulejmani, S., Sonnenfeld, C., Geernaert, T. and Berghmans, F. (2015).
A Micro-Computed Tomography Technique to Study the Quality of in Composite Embedded Fibre Optics.
Sensors, 15(5), 10852-10871.
SCI-IF: 2.245, Q1 quartile, SCI subject category Instruments & Instrumentation, rank: 10/56.
[2015-141] Garoz Gomez, D., Gilabert, G.A., Tsangouri, E., Van Hemelrijck, D., Hillewaere, X., Du Prez, F. and Van Paepegem, W. (2015).
In-depth numerical analysis of the TDCB specimen for characterization of self-healing polymers.
International Journal of Solids and Structures, 64-65, 145-154.
SCI-IF: 2.214, Q1 quartile, SCI subject category Mechanics, rank: 20/137.
[2015-142] Dinh, T.D., Rezaei, A., Puystiens, S., Van Craenenbroeck, M., Carbonez, K., De Laet, L., Mollaert, M., Van Hemelrijck, D. and Van Paepegem, W. (2015).
A study of tension fabric membrane structures under in-plane loading: nonlinear finite element analysis and validation.
Composite Structures, 128, 10-20.
SCI-IF: 3.318, Q1 quartile, SCI subject category Materials Science, Composites, rank: 3/24.
[2015-143] Daelemans, L., van der Heijden, S., De Baere, I., Rahier, H., Van Paepegem, W. and De Clerck, K. (2015).
Nanofibre bridging as a toughening mechanism in carbon/epoxy composite laminates interleaved with electrospun polyamide nanofibrous veils.
Composites Science and Technology, 117, 244-256.
SCI-IF: 3.569, Q1 quartile, SCI subject category Materials Science, Composites, rank: 1/24.
[2015-144] Daelemans, L., van der Heijden, S., De Baere, I., Muhammad, I., Van Paepegem, W., Rahier, H. and De Clerck, K. (2015).
Bisphenol A based polyester binder as an effective interlaminar toughener.
Composites Part B: Engineering, 80, 145-153.
SCI-IF: 2.983, Q1 quartile, SCI subject category Engineering, Multidisciplinary, rank: 5/85.
[2015-145] Pelfrene, J., Van Dam, S. and Van Paepegem, W. (2015).
Numerical analysis of the peel test for characterisation of interfacial debonding in laminated glass.
International Journal of Adhesion and Adhesives, 62, 146-153.
SCI-IF: 1.773, Q2 quartile, SCI subject category Engineering, Chemical, rank: 53/135.
[2015-146] Faes, J.C., Rezaei, A., Van Paepegem, W. and Degrieck, J. (2015).
Influence of matrix toughness and interfacial strength on the toughness of epoxy composites with ductile steel fabric reinforcement.
Composite Interfaces, 22(8), 779-793.
SCI-IF: 0.726, Q3 quartile, SCI subject category Materials Science, Composites, rank: 16/24.
[2015-147] Jain, A., Abdin, Y., Van Paepegem, W., Verpoest, I. and Lomov, S.V. (2015).
Effective anisotropic stiffness of inclusions with debonded interface for Eshelby-based models.
Composite Structures, 131, 692-706.
SCI-IF: 3.318, Q1 quartile, SCI subject category Materials Science, Composites, rank: 3/24.
[2015-148] Lammens, N., Luyckx, G., Voet, E., Van Paepegem, W. and Degrieck, J. (2015).
Optimization of coating diameter of fiber optic sensors embedded in composite structures under arbitrary loading conditions.
Smart Materials and Structures, 24(11), article number 115003.
SCI-IF: 2.502, Q1 quartile, SCI subject category Instruments & Instrumentation, rank: 8/56.
[2015-149] Lammens, N., Luyckx, G., Voet, E., Van Paepegem, W. and Degrieck, J. (2015).
Finite element prediction of resin pocket geometry around embedded optical fiber sensors in prepreg composites.
Composite Structures, 132, 825-832.
SCI-IF: 3.318, Q1 quartile, SCI subject category Materials Science, Composites, rank: 3/24.
[2015-150] Jacques, S., De Baere, I. and Van Paepegem, W. (2016).
Analysis of the numerical and geometrical parameters influencing the simulation of mode I and mode II delamination growth in unidirectional and textile composites.
Applied Composite Materials, 22(6), 637-668.
SCI-IF: 1.048, Q2 quartile, SCI subject category Materials Science, Composites, rank: 12/24.
[2015-151] Kersemans, M., Smet, P.F., Lammens, N., Degrieck, J. and Van Paepegem, W. (2016).
Fast Reconstruction of a Bounded Ultrasonic Beam using Acoustically induced Piezo-Luminescence.
Applied Physics Letters, 107(23), article number 234102.
SCI-IF: 3.302, Q1 quartile, SCI subject category Physics, Applied, rank: 21/144.
[2015-152] Jain, A., Abdin, Y., Van Paepegem, W., Verpoest, I. and Lomov, S.V. (2015).
Non-symmetric stiffness tensor prediction by the Mori-Tanaka scheme - Comments on the article "Effective anisotropic stiffness of inclusions with debonded interface for Eshelby-based models" [Composite Structures 131 (2015) 692-706]
Composite Structures, 134, 1118-1119.
SCI-IF: 3.318, Q1 quartile, SCI subject category Materials Science, Composites, rank: 3/24.
[2016-153] Xu, J., Lomov, S.V., Verpoest, I., Daggumati, S., Van Paepegem, W. and Degrieck, J. (2016).
A comparative study of twill weave reinforced composites under tension-tension fatigue loading: Experiments and meso-modelling.
Composite Structures, 135, 306-315.
SCI-IF: 3.318, Q1 quartile, SCI subject category Materials Science, Composites, rank: 3/24.
[2016-154] Gilabert, F.A., Garoz, D. and Van Paepegem, W. (2016).
Numerical study of transitional brittle-to-ductile debonding of a capsule embedded in a matrix.
Composite Interfaces, 24(1), 69-84.
SCI-IF: 0.726, Q3 quartile, SCI subject category Materials Science, Composites, rank: 16/24.
[2016-155] Pelfrene, J., Kuntsche, J., Van Dam, S., Van Paepegem, W. and Schneider, J. (2016).
Critical assessment of the post-breakage performance of blast loaded laminated glazing: experiments and simulations.
International Journal of Impact Engineering, 88, 61-71.
SCI-IF: 2.201, Q1 quartile, SCI subject category Engineering, Mechanical, rank: 17/130.
[2016-156] Strantza, M., Vafadari, R., De Baere, D., Vrancken, B., Van Paepegem, W., Vandendael, I., Terryn, H., Guillaume, P. and Van Hemelrijck, D. (2016).
Fatigue of Ti6Al4V Structural Health Monitoring systems produced by Selective Laser Melting.
Materials, 9(2), article number 106.
SCI-IF: 2.651, Q1 quartile, SCI subject category Materials Science, Multidisciplinary, rank: 55/260.
[2016-157] Kersemans, M., Martens, A., Degrieck, J., Van Den Abeele, K., Delrue, S., Pyl, L., Zastavnik, F., Sol, H. and Van Paepegem, W. (2016).
The Ultrasonic Polar Scan for Composite Characterization and Damage Assessment: Past, Present and Future.
Applied Sciences, 6(2), article number 58.
SCI-IF: 1.762, Q2 quartile, SCI subject category Materials Science, Multidisciplinary, rank: 129/271.
[2016-158] Daelemans, L., van der Heijden, S., De Baere, I., Rahier, H., Van Paepegem, W. and De Clerck, K. (2016).
Using aligned nanofibres for identifying the toughening micromechanisms in nanofibre interleaved laminates.
Composites Science and Technology, 124, 17-26.
SCI-IF: 3.569, Q1 quartile, SCI subject category Materials Science, Composites, rank: 1/24.
[2016-159] Dinh, T.D., Rezaei, A., Punurai, W., De Laet, L., Mollaert, M., Van Hemelrijck, D. and Van Paepegem, W. (2016).
A shape-optimization approach to integrated design and nonlinear analysis of tensioned fabric membrane structures with boundary cables.
International Journal of Solids and Structures, 83, 114-125..
SCI-IF: 2.214, Q1 quartile, SCI subject category Mechanics, rank: 20/137.
[2016-160] Faes, J.C., Rezaei, A., Van Paepegem, W. and Degrieck, J. (2016).
Accuracy of 2D FE models for prediction of crack initiation in nested textile composites with inhomogeneous intra-yarn fiber volume fractions.
Composite Structures, 140, 11-20.
SCI-IF: 3.318, Q1 quartile, SCI subject category Materials Science, Composites, rank: 3/24.
[2016-161] Daelemans, L., van der Heijden, S., De Baere, I., Rahier, H., Van Paepegem, W. and De Clerck, K. (2016).
Damage resistant composites using electrospun nanofibers: a multiscale analysis of the toughening mechanisms.
ACS Applied Materials & Interfaces, 8(18), 11806-11818.
SCI-IF: 7.145, Q1 quartile, SCI subject category Materials Science, Multidisciplinary, rank: 25/271.
[2016-162] Chiesura, G., Lamberti, A., Yang, Y., Luyckx, G., Van Paepegem, W., Vanlanduit, S., Vanfleteren, J. and Degrieck, J. (2016).
RTM Production Monitoring of the A380 Hinge Arm Droop Nose Mechanism: a multi-sensor approach.
Sensors, 16(6), Article number 866.
SCI-IF: 2.033, Q1 quartile, SCI subject category Instruments & Instrumentation, rank: 12/56.
[2016-163] Vepa, K.S. and Van Paepegem, W. (2016).
Gyroscope based floating LIDAR design for getting stable offshore wind velocity profiles.
Sea Technology, 57(6), 41-43.
SCI-IF: 0.101, Q4 quartile, SCI subject category Engineering, Ocean, rank: 14/14.
[2016-164] Lammens, N., Luyckx, G., Van Paepegem, W. and Degrieck, J. (2016).
Finite Element prediction of resin pocket geometries around arbitrary inclusions in composites: case study for an embedded optical fiber interrogator.
Composite Structures, 146, 95-107.
SCI-IF: 3.318, Q1 quartile, SCI subject category Materials Science, Composites, rank: 3/24.
[2016-165] Van Stappen, J., Bultreys, T., Gilabert, F.A., Hillewaere, X.K.D., Gomez, D.G., Van Tittelboom, K., Dhaene, J., De Belie, N., Van Paepegem, W., Du Prez, F.E. and Cnudde, V. (2016).
The microstructure of capsule containing self-healing materials: A micro-computed tomography study.
Materials Characterization, 119, 99-109.
SCI-IF: 2.383, SCI subject category Metallurgy & Metallurgical Engineering, Civil, rank: 7/73.
[2016-166] Van Craenenbroeck, M., Puystiens, S., De Laet, L., Van Hemelrijck, D., Van Paepegem, W. and Mollaert, M. (2016).
Integrated analysis of kinematic form active structures for architectural applications: Experimental verification.
Engineering Structures, 123, 59-70.
SCI-IF: 1.713, SCI subject category Engineering, Civil, rank: 18/122.
[2016-167] Jain, A., Van Paepegem, W., Verpoest, I. and Lomov, S.V. (2016).
A feasibility study of the Master SN curve approach for short fiber reinforced composites.
International Journal of Fatigue, 91, 264-274.
SCI-IF: 1.976, SCI subject category Engineering, Mechanical, rank: 14/125.
[2016-168] Puystiens, S., Van Craenenbroeck, M., De Laet, L., Van Hemelrijck, D., Van Paepegem, W. and Mollaert, M. (2016).
Integrated analysis of kinematic form active structures for architectural applications: Design of a representative case study.
Engineering Structures, 124, 376-387.
SCI-IF: 1.713, SCI subject category Engineering, Civil, rank: 18/122.
[2016-169] Vanwalleghem, J., De Baere, I., Huysman, S., Lapeire, L., Verbeken, K., Nila, A., Vanlanduit, Loccufier, M. and Van Paepegem, W. (2016).
Effective use of transient vibration damping results for non-destructive measurements of fibre-matrix adhesion of fibre-reinforced flax and carbon composites.
Polymer Testing, 55, 269-277.
SCI-IF: 2.240, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 2/33.
[2016-170] Krundaeva, A., De Bruyne, G., Gagliardi, F. and Van Paepegem, W. (2016).
Dynamic compressive strength and crushing properties of expanded polystyrene foam for different strain rates and different temperatures.
Polymer Testing, 55, 61-68.
SCI-IF: 2.240, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 2/33.
[2016-171] Jain, A., Van Paepegem, W., Verpoest, I. and Lomov, S.V. (2016).
A statistical treatment of the loss of stiffness during cyclic loading for short fiber reinforced injection molded composites.
Composites Part B – Engineering, 103, 40-50.
SCI-IF: 2.983, Q1 quartile, SCI subject category Engineering, Multidisciplinary, rank: 5/85.
[2016-172] Sevenois, R.D.B., Garoz, D., Gilabert, F.A., Spronk, S.W.F., Fonteyn, S., Heyndrickx, M., Pyl, L., Van Hemelrijck, D., Degrieck, J. and Van Paepegem, W. (2016).
Avoiding interpenetrations and the importance of nesting in analytic geometry construction for Representative Unit Cells of woven composite laminates.
Composites Science and Technology, 136, 119-132.
SCI-IF: 3.569, Q1 quartile, SCI subject category Materials Science, Composites, rank: 1/24.
[2016-173] van der Heijden, S., Daelemans, L., Meireman, T., De Baere, I., Rahier, H., Van Paepegem, W. and De Clerck, K. (2016).
Interlaminar toughening of resin transfer molded laminates by electrospun polycaprolactone structures: Effect of the interleave morphology.
Composites Science and Technology, 136, 10-17.
SCI-IF: 3.569, Q1 quartile, SCI subject category Materials Science, Composites, rank: 1/24.
[2016-174] Jain, A., Veas, J.M., Straesser, S., Van Paepegem, W., Verpoest, I. and Lomov, S.V. (2016).
The Master SN curve approach – A hybrid multi-scale fatigue simulation of short fiber reinforced composites.
Composites Part A, 91(2), 510-518.
SCI-IF: 3.071, Q1 quartile, SCI subject category Engineering, Manufacturing, rank: 2/40.
[2016-175] Daelemans, L., Faes, J., Allaoui, S., Hivet, G., Dierick, M., Van Hoorebeke, L. and Van Paepegem, W. (2016).
Finite element simulation of the woven geometry and mechanical behaviour of a 3D woven dry fabric under tensile and shear loading using the digital element method.
Composites Science and Technology, 137, 177-187.
SCI-IF: 3.569, Q1 quartile, SCI subject category Materials Science, Composites, rank: 1/24.
[2017-176] van der Heijden, S., Daelemans, L., De Bruycker, K., Simal, R., De Baere, I., Van Paepegem, W., Rahier, H. and De Clerck, K. (2017).
Novel composite materials with tunable delamination resistance using functionalizable electrospun SBS fibers.
Composite Structures, 159, 12-20.
SCI-IF: 3.318, Q1 quartile, SCI subject category Materials Science, Composites, rank: 3/24.
[2017-177] Allaeys, F., Luyckx, G., Van Paepegem, W. and Degrieck, J. (2017).
Development and validation of a set-up to measure the transferred multi-axial impact momentum of a bird strike on a booster vane.
International Journal of Impact Engineering, 99, 102-110.
SCI-IF: 2.646, Q1 quartile, SCI subject category Mechanics, rank: 13/135.
[2017-178] Allaeys, F., Luyckx, G., Van Paepegem, W. and Degrieck, J. (2017).
Characterization of real and substitute birds through experimental and numerical analysis of momentum, average impact force and residual energy in bird strike on three rigid targets: A flat plate, a wedge and a splitter.
International Journal of Impact Engineering, 99, 1-13.
SCI-IF: 2.646, Q1 quartile, SCI subject category Mechanics, rank: 13/135.
[2017-179] Lammens, N., Kersemans, M., De Baere, I. and Van Paepegem, W. (2017).
On the visco-elasto-plastic response of additively manufactured polyamide-12 (PA-12) through selective laser sintering.
Polymer Testing, 57, 149-155.
SCI-IF: 2.350, Q1 quartile, SCI subject category Materials Science, Characterization & Testing, rank: 5/33.
[2017-180] Hedayatrasa, S., Kersemans, M., Abhary, K., Uddin, M., Guest, J.K. and Van Paepegem, W. (2017).
Maximizing bandgap width and in-plane stiffness of porous phononic plates for tailoring flexural guided waves: Topology optimization and experimental validation.
Mechanics of Materials, 105, 188-203.
SCI-IF: 2.636, Q1 quartile, SCI subject category Mechanics, rank: 15/135.
[2017-181] Dinh, T.D., Rezaei, A., Daelemans, L., Mollaert, M., Van Hemelrijck, D. and Van Paepegem, W. (2017).
A hybrid micro-meso-scale unit cell model for homogenization of the nonlinear orthotropic material behavior of coated fabrics used in tensioned membrane structures.
Composite Structures, 162, 271-279.
SCI-IF: 3.853, Q1 quartile, SCI subject category Materials Science, Composites, rank: 2/25.
[2017-182] Gilabert, F.A., Van Tittelboom, K., Van Stappen, J., Cnudde, V., De Belie, N. and Van Paepegem, W. (2017).
Integral procedure to assess crack filling and mechanical contribution of polymer-based healing agent in encapsulation-based self-healing concrete.
Cement & Concrete Composites, 77, 68-80.
SCI-IF: 3.399, Q1 quartile, SCI subject category Materials Science, Composites, rank: 5/25.
[2017-183] Daelemans, L., van der Heijden, S., De Baere, I., Rahier, H., Van Paepegem, W. and De Clerck, K. (2017).
Improved fatigue delamination behaviour of composite laminates with electrospun thermoplastic nanofibrous interleaves using the Central Cut-Ply method.
Composites Part A-Applied Science and Manufacturing, 94, 10-20.
SCI-IF: 3.071, Q1 quartile, SCI subject category Engineering, Manufacturing, rank: 2/40.
[2017-184] Sevenois, R.D.B., Garoz, D., Gilabert, F.A., Spronk, S.W.F. and Van Paepegem, W. (2017).
Microscale based prediction of matrix crack initiation in UD composite plies subjected to multiaxial fatigue for all stress ratios and load levels.
Composites Science and Technology, 142, 124-138.
SCI-IF: 3.569, Q1 quartile, SCI subject category Materials Science, Composites, rank: 1/24.
[2017-185] Gilabert, F.A., Van Tittelboom, K., Tsangouri, E., Van Hemelrijck, D., De Belie, N. and Van Paepegem, W. (2017).
Determination of strength and debonding energy of a glass-concrete interface for encapsulation-based self-healing concrete.
Cement & Concrete Composites, 79, 76-93.
SCI-IF: 3.399, Q1 quartile, SCI subject category Materials Science, Composites, rank: 5/25.


P1. Articles in the ISI Proceedings

[2000-1]

Van Paepegem, W. and Degrieck, J. (2000).
Experimental setup for the bending fatigue of fibre-reinforced composite materials.
In: Bache, M.R. et al. (eds.). Proceedings of Fatigue 2000: Fatigue & Durability assessment of materials, components and structures. Cambridge, United Kingdom, 10-12 April 2000, Chameleon Press Ltd., p. 115-122.

[2000-2]

Van Paepegem, W. and Degrieck, J. (2000).
Numerical modelling of fatigue degradation of fibre-reinforced composite materials.
In: Topping, B.H.V. (ed.). Proceedings of the Fifth International Conference on Computational Structures Technology. Volume F: Computational Techniques for Materials, Composites and Composite Structures. Leuven, Belgium, 6-8 September 2000, Civil-Comp Press, p. 319-326.

[2006-3]

Luyckx, G., De Waele, W., Van Paepegem, W., Degrieck, J., Vlekken, J. and Chah, K. (2006).
Measurement of multi-axial stress/strain in composite elements with Bragg sensors.
Proceedings of the Third European Workshop on Structural Health Monitoring (EWSHM), July 5-7, 2006, Granada, Spain. p. 969-976.

[2006-4]

Sainov, V., Harizanova, J., Ossikovska, S., Van Paepegem, W., Degrieck, J. and Boone, P. (2005).
Fatigue Detection of Fibres Reinforced Composite Materials by Fringes Projection and Speckle Shear Interferometry.
Proceedings of the Fifth International Workshop FRINGE 2005, 11-14 September 2005, Stuttgart, Germany, p. 567-570.

[2006-5]

Sainov, V., Harizanova, J., Ossikovska, S., Van Paepegem, W., Degrieck, J. and Boone, P. (2005).
Testing of Fibers Reinforced Composite Vessel by Fringes Projection and Speckle Shear Interferometry.
Proceedings of the International Conference on Holography, Optical Recording and Processing of Information, 21-25 May 2005, Varna, Bulgaria. Article 625222 p. 1-6.

[2007-6]

Samyn, P., Quintelier, J., Van Paepegem, W. and De Waele, W. (2007).
A relation between laboratory and full-scale testing of polyester/polyester composites under static and dynamic load.
Proceedings of PRICM-6, 6th Pacific Rim International Conference on Advanced Materials and Processing, Jeju Island, Korea, 5-9 November 2007. p. 725-728.

[2007-7]

Luyckx, G., De Waele, W., Degrieck, J., Van Paepegem, W., Vlekken, J. and Verbeke, T. (2007).
Feasibility study of an embedded Multi-Axial fibre bragg grating sensor.
Proceedings of the SPIE Conference on Optical Sensing Technology and Applications, Prague, Czech Repubic, 16-18 April, 2007. p. U113-U122

[2007-8]

Shulev, A., Van Paepegem, W., Harizanova, J., Moentjens, A., Degrieck, J. and Sainov, V. (2007).
Projection moiré measurement of the deflection of composite plates subject to bird strike impact.
Optical Metrology 2007 – Optical Measurement Systems for Industrial Inspection, Munich, Germany, 18-22 June 2007. Article 66162Z p. 1-9.

[2007-9]

Taillaert, D., Van Paepegem, W., Vlekken, J. and Baets, R. (2007).
A thin foil optical strain gage based on silicon-on-insulator microresonators.
Proceedings of the Third European Workshop on Optical Fibre Sensors (EWOFS 2007), 4-6 July 2007, Napoli, Italy. p. 1-4.

[2008-10]

Cofaru, C., Philips, W. and Van Paepegem, W. (2008).
Gradient-based optical flow for sub-pixel registration of speckle image sequences using a spatial/temporal postprocessing technique.
Proceedings of the 2008 IEEE International Conference on Image Processing (ICIP), San Diego, California, U.S.A., October 12–15, 2008. p. 845-848.

[2008-11]

De Baere, I., Luyckx, G., Van Paepegem, W., Degrieck, J., Voet, E. and Vlekken, J. (2007).
The use of optical fibres for fatigue testing of fibre-reinforced thermoplastics.
Proceedings of the Fourth International Conference Emerging Techonologies in Non-Destructive Testing (ETNDT 4), Stuttgart, Germany, 2 – 4 april 2007. p. 65-70.

[2008-12]

Luyckx, G., Degrieck, J., De Baere, I., De Waele, W., Van Paepegem, W. and Verbeke, T. (2007).
Monitoring of a curved beam test structure using Bragg sensors and acoustic emission.
Proceedings of the Fourth International Conference Emerging Techonologies in Non-Destructive Testing (ETNDT 4), Stuttgart, Germany, 2 – 4 april 2007. p. 59-64.

[2008-13]

Luyckx, G., Degrieck, J., De Waele, W., Van Paepegem, W., Vlekken, J. and Verbeke, T. (2007).
Non-destructive evaluation of composite structures using an innovative Bragg sensor.
Proceedings of the Fourth International Conference Emerging Techonologies in Non-Destructive Testing (ETNDT 4), Stuttgart, Germany, 2 – 4 april 2007. p. 39-44.

[2008-14]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2007).
Electrical resistance measurement on carbon fibre-reinforced thermoplastics with rivets as electrodes.
Proceedings of the Fourth International Conference Emerging Techonologies in Non-Destructive Testing (ETNDT 4), Stuttgart, Germany, 2 – 4 april 2007. p. 269-274.

[2008-15]

Stoykova, E., Van Paepegem, W., De Pauw, S., Degrieck, J. and Sainov, V. (2008).
Study of mechanical characteristics of window security films by phase-stepping photoelasticity.
SPIE proceedings of the Fifteenth International School on Quantum Electronics "Laser Physics and Applications" (XV ISQE), 15-19 September 2008, Bourgas, Bulgaria. p. 1-11.

[2008-16]

Shulev, A., Van Paepegem, W., Stoykova, E., De Pauw, S., Degrieck, J. and Sainov, V. (2008).
Projection moiré measurement of glass specimens retrofitted with safety film.
SPIE proceedings of the Fifteenth International School on Quantum Electronics "Laser Physics and Applications" (XV ISQE), 15-19 September 2008, Bourgas, Bulgaria. p. 1-10.

[2008-17]

Cofaru, C., Philips, W. and Van Paepegem, W. (2008).
Optical Flow Processing for Sub-pixel Registration of Speckle Image Sequences.
Proceedings of the XXXI conference on Applications of Digital Image Processing, San Diego, California, U.S.A., August 11-14, 2008. p. 1-12.

[2009-18]

Shulev, A., Van Paepegem, W., De Pauw, S., Stoikova, E., Degrieck, J. and Sainov, V. (2009).
Projection moiré measurement of glass specimens retrofitted with safety film.
Proceedings of the 4th International Conference on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2009), Antwerp, Belgium, 25-26 May 2009. p. 369-377.

[2009-19]

Stoykova, E., Van Paepegem, W., Minchev, G., Degrieck, J. and Sainov, V. (2009).
Full field stress analysis of window security films by phase-stepping photoelasticity.
Proceedings of the 4th International Conference on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2009), Antwerp, Belgium, 25-26 May 2009. p. 327-337.

[2009-20]

Ramault, C., Makris, A., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2009).
Application of various strain measuring techniques on a biaxially loaded cruciform composite specimen.
Proceedings of the 4th International Conference on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2009), Antwerp, Belgium, 25-26 May 2009. p. 275-285.

[2009-21]

Cofaru, C., Philips, W., Van Paepegem, W., Lava, P. and Debruyne, D. (2009).
Generation of realistic ground truth images using Radial Basis Functions for the evaluation of DIC algorithms.
Proceedings of the 4th International Conference on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2009), Antwerp, Belgium, 25-26 May 2009. p. 111-119.

[2009-22]

Kakogiannis, D.A., Van Hemelrijck, D., Wastiels, J., Van Ackeren, J., Palanivelu, S., Van Paepegem, W., Vantomme, J. and Nurick, G.N. (2009).
Experimental and numerical study of pultruded composite tubes under blast loading.
Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009. p. 1677-1683.

[2009-23]

Palanivelu, S., Van Paepegem, W., Degrieck, J., De Wolf, K., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009).
Numerical axial impact study of pultruded circular and square composite tubes.
Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009. p. 771-777.

[2009-24]

Palanivelu, S., Van Paepegem, W., Degrieck, J., De Wolf, K., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009).
Study of blast load on recyclable empty metal cans.
Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009. p. 709-715.

[2009-25]

Palanivelu, S., De Pauw, S., Van Paepegem, W., Degrieck, J., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009).
Validation of digital image correlation technique for impact loading applications.
Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009. p. 373-379.

[2009-26]

Peirs, J., Verleysen, P., Van Paepegem, W. and Degrieck, J. (2009).
Novel pure-shear sheet specimen geometry for dynamic material characterisation.
Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009. p. 35-41.

[2009-27]

Luyckx, G., Voet, E., De Waele, W., Van Paepegem, W., Degrieck, J. and Vlekken, J. (2008).
Strain monitoring of FRP elements using an embedded fibre optic sensor.
Third International Conference on Smart Materials, Structures and Systems, Acireale, Italy, June 08-13, 2008. Advances in Science and Technology, Vol. 56, August 2008. p. 435-440.

[2010-28]

Cofaru, C., Philips, W. and Van Paepegem, W. (2010).
Adaptive partitioning method in high resolution speckle imagery for sub-pixel digital image correlation.
Proceedings of the 2010 International Conference on Image Processing (ICIP 2010), September 26-29, 2010, The Hong Kong Convention and Exhibition Centre, Hong Kong. p. 769-772.

[2010-29]

Xu, J., Lomov, S.V., Verpoest, I., Daggumati, S., Van Paepegem, W. and Degrieck, J. (2010).
FE-Modeling of Damage of Twill Carbon/Epoxy Composite on Meso-Scale, Materials Characterization and Experimental Verification.
Proceedings of the 10th International Conference on Textile Composites (TEXCOMP10), Lille, France, 26-28 October, 2010. p. 44-52.

[2010-30]

Daggumati, S., Voet, E., Van Paepegem, W., Degrieck, J., Praet, T., Verhegghe, B., Xu, J., Lomov, S.V. and Verpoest, I. (2010).
Influence of the Internal Yarn Nesting (Shifting) on the Local Structural Response of a Satin Weave Composite-An Experimental and Numerical Overview.
Proceedings of the 10th International Conference on Textile Composites (TEXCOMP10), Lille, France, 26-28 October, 2010. p. 238-247.

[2010-31]

Ramault, C., Makris, A., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2010).
Composite material characterization through biaxial testing of cruciform specimens.
Proceedings of the 14th International Conference on Experimental Mechanics (ICEM-14), July 4 -9, 2010, Poitiers, France. Article 16007, p. 1-2.

[2010-32]

Peirs, J., Verleysen, P., Van Paepegem, W. and Degrieck, J. (2010).
Combined experimental and numerical approach for identification of dynamic material model parameters.
Proceedings of the 14th International Conference on Experimental Mechanics (ICEM-14), July 4 -9, 2010, Poitiers, France. Article 18003, p. 1-8.

[2010-33]

De Baere I, Van Paepegem W. and Degrieck J. (2010).
Fusion bonding of carbon fabric reinforced polyphenylene sulphide.
Proceedings of the 14th International Conference on Experimental Mechanics (ICEM-14), July 4 -9, 2010, Poitiers, France. Article 08005, p. 1-8.

[2010-34]

Van Ackeren, J., Blom, J., Kakogiannis, D., Wastiels, J., Van Hemelrijck, D., Palanivelu, S., Van Paepegem, W., Degrieck, J. and Vantomme, J. (2010).
Strain rate effect on the mechanical behaviour of a textile reinforced cement composite.
Proceedings of the International RILEM Conference on Material Science, Vol I: 2nd ICTRC Textile Reinforced Concrete, Aachen, Germany, 6-8 September 2010. p. 195-204.

[2010-35]

Voet, E., Luyckx, G., Degrieck, J. and Van Paepegem, W. (2011).
Evaluation of the transversal strain state in a satin weave composite using fibre Bragg gratings.
Proceedings of the 21st International Conference on Optical Fiber Sensors (OFS-21), 15-19 May 2011, Ottawa, Canada. Article 77530K.

[2010-36]

Nobre, J.P., Stiffel, J.H., Van Paepegem, W., Nau, A., Batista, A.C., Marques, M.J. and Scholtes, B. (2010).
Quantifying the drilling effect during the application of incremental hole-drilling technique in laminate composites.
Proceedings of the 8th European Conference on Residual Stresses (ECRS8), Riva del Garda, Italy, June 26-28, 2010. p. 510-515.

[2011-37]

Cofaru, C., Philips, W. and Van Paepegem, W. (2011).
Dense and accurate motion and strain estimation in high resolution speckle images using an image-adaptive approach.
Proceedings of SPIE Optics+Photonics, Volume 8135, article number 81351G, 21-25 August 2011, San Diego Convention Center, San Diego, California United States. p. 1-11.

[2011-38]

De Strycker, M., Van Paepegem, W., Schueremans, L. and Debruyne, D. (2011).
The effect of residual stresses on the strain evolution during welding of thin-walled tubes.
Proceedings of the 14th International Conference on Sheet Metal (SheMet 2011), 18-20 April 2011, Leuven, Belgium. p. 1-6.

[2011-39]

De Strycker, M., Lava, P., Van Paepegem, W., Schueremans, L. and Debruyne, D. (2011).
Validation of welding simulations using thermal strains measured with DIC.
Proceedings of the International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation for Validation (ISEV), 7-9 September 2011, The Royal College of Physicians, Edinburgh, United Kingdom. p. 1-6.

[2011-40]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Reymen, B., Ndambi, J.M., Segers, E., Vantomme, J., Van Ackeren, J., Kakogiannis, D., Wastiels, J. and Van Hemelrijck, D. (2011).
Performance of sacrificial cladding structure made of empty recyclable metal beverage cans under large-scale air blast load.
Proceedings of the Third International Workshop on Performance, Protection & Strengthening of Structures under Extreme Loading (Protect 2011), 30 August – 1 September 2011, Palazzo dei Congressi, Lugano, Italy. p. 416-421.

[2011-41]

Van Ackeren, J., Blom, J., Kakogiannis, D., Wastiels, J., Van Hemelrijck, D., Palanivelu, S., Van Paepegem, W. and Vantomme, J. (2011).
Applicability of composite Charpy impact method for strain hardening textile reinforced cementitious composites,
Proceedings of the 2nd RILEM International conference on Strain Hardening Cementitious Composites (SHCC2-RIO), Rio De Janeiro, Brazil, 12-14 December 2011, p. 399-407

[2012-42]

Vanwalleghem, J., Mortier, F., De Baere, I., Loccufier, M. and Van Paepegem, W. (2012).
Design of an instrumented bicycle for the evaluation of bicycle dynamics and its relation with the cyclist’s comfort.
Proceedings of the 9th Conference of the International Sports Engineering Association (ISEA), 9-13 July 2012, Lowell, Masachussets, USA. p. 1-6.



A2. Articles in other international journals with peer review

[2001-1]

Degrieck, J. and Van Paepegem, W. (2001).
Fatigue Damage Modelling of Fibre-Reinforced Composite Materials: Review.
Applied Mechanics Reviews, 54(4), 279-300. (.pdf)

[2001-2]

Van Paepegem, W. and Degrieck, J. (2001).
Modelling Strategies for Fatigue Damage Behaviour of Fibre-reinforced Composites.
European Journal of Mechanical and Environmental Engineering, 46(4), 217-227. (.pdf)

[2001-3]

Van Paepegem, W. and Degrieck, J. (2001).
Experimental and Numerical Investigation of Fatigue of Fibre-reinforced Composite Materials.
Engineering Integrity - Journal of the Engineering Integrity Society, 9, 6-12.

[2001-4]

Van Paepegem, W. and Degrieck, J. (2001).
Fatigue of Composites: Finite Element Implementation of Fatigue Degradation Models for Fibre-reinforced Composites.
Composites in Manufacturing, 17(3), 1-6.

[2006-5]

Leendertz, H., Van Schepdael, L., Van Paepegem, W., Samyn, P., De Baets, P. and Degrieck, J. (2006).
Anderung der gelenklagerkonstruktion des sturmflutsperrwerks bei Rotterdam.
Stalhbau, 75 Heft 1 (Jan 2006), 45-54.

[2006-6]

Samyn, P., De Baets, P., Van Paepegem, W., Degrieck, J., Van Schepdael, L., Gerber, A. and Leendertz, J.S. (2006).
Experimental Study of the Friction and Wear Behaviour of a Polymer Disc / Primer Coating Combination Used in Ball-Joints by Means of Large-Scale Testing.
Tribotest, 12(2), 119-131.

[2008-7]

Luyckx, G., Voet, E., De Waele, W., Van Paepegem, W., Degrieck, J. and Vlekken, J. (2008).
Strain monitoring of FRP elements using an embedded fibre optic sensor.
Advances in Science and Technology, Vol. 56, August 2008.



B. Books and book chapters

[2002-1]

Van Paepegem, W. (2002).
Development and finite element implementation of a damage model for fatigue of fibre-reinforced polymers.
PhD thesis, Ghent, Ghent University, 403 p. (ISBN 90-76714-13-4)

[2007-2]

Van Paepegem, W., De Baere, I., Lamkanfi, E., Luyckx, G. and Degrieck, J. (2007).
Numerical modelling of fatigue in textile polymer composites.
In: Pavlou, D.G. (ed.). Computational & experimental analysis of damaged materials. Research Signpost, India (http://www.ressign.com/), 2007, pp. 39-75 (ISBN 978-81-7895-308-3).

[2008-3]

Van Paepegem, W., De Baere, I., Lamkanfi, E., Luyckx, G. and Degrieck, J. (2008).
Research directions in the fatigue testing of polymer composites.
In: Durand, L.P.. (ed.). Composite Materials Research Progress. Nova Science Publishers, Inc., New York, United States of America (http://www.novapublishers.com) (ISBN 1-60021-994-2).

[2009-4]

Van Paepegem, W. (2009).
Fatigue damage in structural textile composites: testing and modelling strategies.
In: Miraftab, M. (ed.). Fatigue Failure of Textile Fibres. Woodhead Publishing (http://www.woodheadpublishing.com/), United Kingdom, April 2009 (ISBN 978-1-84569-327-5).

[2009-5]

Van Paepegem, W. (2009).
Mechanische karakterisering van vezelversterkte kunststoffen.
In: De Moor, M. (ed.). Werken met innovatieve materialen: koudhardende kunststoffen (E: Working with innovative materials: cold curing plastics). Antilope Printing, Belgium (ISBN 978-9-08149-090-0).

[2010-6]

Van Paepegem, W. (2010).
Fatigue damage modelling with the phenomenological residual stiffness approach.
In: Vassilopoulos, A.P. (ed.). Fatigue life prediction of composites and composite structures. Woodhead Publishing (http://www.woodheadpublishing.com/), United Kingdom, July 2010 (ISBN 978-1-84569-525-5).

[2010-7]

Van Paepegem, W. (2010).
Fatigue testing for polymer matrix composites.
In: Guedes, R.M. (ed.). Creep and fatigue in polymer matrix composites. Woodhead Publishing (http://www.woodheadpublishing.com/), United Kingdom, November 2010, p. 461-491 (ISBN-13: 978 1 84569 656 6).

[2012-8]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2012).
The in-plane shear behaviour of a carbon fabric reinforced thermoplastic under quasi-static and fatigue loading conditions.
In: Columbus, F. (ed.). Fiber reinforced composites. Nova Science Publishers, Inc., New York, United States of America (http://www.novapublishers.com), pp.159-216 (ISBN-13: 978-1-61470-303-7).